Device Posture client functionality is provided by the EAA Client. After successfully
authenticating the EAA Client with EAA platform, Device Posture signals data is automatically collected from
the device and can be used to control application access.
Note: When using the EAA Client on virtual
machines running macOS, refer to the virtualization software
vendor’s guide on how to generate unique UUID for each virtual
Device Posture information in EAA Client
After you install and configure the EAA Client on your system,
the Device Posture screen containing
Remediation and Signals tabs opens by default on the EAA Client page.
Note:Device Posture is only
available with EAA Client version
2.0 or later. If you are running an earlier version of the
client you need to update your client.
The Remediation tab shows information about any
applications that were blocked because of device security gaps or
vulnerabilities. Remediation for signals that require attention are
listed in the right hand column.
Click the Signals tab to display signals that are
continuously checked and collected from your macOS or Windows
client. With this capability you can verify and monitor the security
state of your machine. Clicking the Update Device
Posture button will cause the EAA Client to update signals
discovered on your device. The current signals are then displayed on
the Signals tab.